Weller Wtsf 80: Pros And Cons, Common Issues, And Best Places To Purchase
Weller WTSF 80 Information
The Weller WTSF 80 is a soldering iron with a solder feeder. It is designed for industrial applications where precision and repeatability are essential. The WTSF 80 features a variable feed rate from 1 to 27.5 mm/s, a maximum solder wire weight of 1 kg, and a pulse mode for precise application of solder. The iron is compatible with the Weller WT 1 soldering station and comes with a variety of features to make soldering easier and more efficient.
Introduction
The Weller WTSF 80 is a soldering iron with a solder feeder. It is designed for industrial applications where precision and repeatability are essential. The WTSF 80 features a variable feed rate from 1 to 27.5 mm/s, a maximum solder wire weight of 1 kg, and a pulse mode for precise application of solder. The iron is compatible with the Weller WT 1 soldering station and comes with a variety of features to make soldering easier and more efficient.
Image
Specifications
| Feature | Specification |
|---|---|
| Solder wire diameter | 0.5 mm, 0.8 mm, and 1.0 mm |
| Feed rate | Adjustable from 1 to 27.5 mm/s |
| Maximum solder wire weight | 1 kg |
| Pulse mode | Yes |
| Compatible with | Weller WT 1 soldering station |
Features
- Variable feed rate: The WTSF 80 allows you to adjust the feed rate of the solder wire from 1 to 27.5 mm/s. This gives you precise control over the amount of solder that is applied, which is essential for critical soldering applications.
- Maximum solder wire weight: The WTSF 80 can accommodate a maximum solder wire weight of 1 kg. This means that you can solder for longer periods of time without having to refill the solder feeder.
- Pulse mode: The pulse mode of the WTSF 80 allows you to apply solder in short bursts. This is useful for delicate soldering applications where you need to avoid overheating the components.
- Compatible with Weller WT 1 soldering station: The WTSF 80 is compatible with the Weller WT 1 soldering station. This means that you can use the WTSF 80 with the WT 1's temperature control and other features.
What's in the box
The Weller WTSF 80 comes with the following items:
- WTSF 80 soldering iron with solder feeder
- Solder wire (0.5 mm, 0.8 mm, and 1.0 mm)
- Soldering tip
- Stand
- Instruction manual
Conclusion
The Weller WTSF 80 is a powerful and versatile soldering iron with a solder feeder. It is ideal for industrial applications where precision and repeatability are essential. The WTSF 80 features a variable feed rate, a maximum solder wire weight of 1 kg, and a pulse mode for precise application of solder. It is also compatible with the Weller WT 1 soldering station. If you are looking for a high-performance soldering iron with a solder feeder, the Weller WTSF 80 is a great option.
Weller WTSF 80 Compare with Similar Item
a table comparing the Weller WTSF 80 to some similar items:
| Feature | Weller WTSF 80 | Hakko FX-888D | Metcal SP-90N |
|---|---|---|---|
| Power | 80 W | 75 W | 90 W |
| Temperature range | 100-450°C | 150-480°C | 150-450°C |
| Wire feed rate | 2-10 mm/min | 2-12 mm/min | 2-10 mm/min |
| Standby power consumption | 1 W | 2 W | 2 W |
| Weight | 1.2 kg | 1.4 kg | 1.5 kg |
| Price | \$129 | \$169 | \$199 |
As you can see, the Weller WTSF 80 is the most affordable option, but it also has the lowest power and temperature range. The Hakko FX-888D is more powerful and has a wider temperature range, but it is also more expensive. The Metcal SP-90N is the most powerful option, but it is also the most expensive.
Ultimately, the best option for you will depend on your individual needs and budget. If you are looking for an affordable soldering iron with a basic feature set, the Weller WTSF 80 is a good choice. If you need a more powerful soldering iron with a wider temperature range, the Hakko FX-888D or Metcal SP-90N are better options.
Here are some additional details about each of the three soldering irons:
- The Weller WTSF 80 is a digital soldering iron with a temperature range of 100-450°C. It has a pulse setting that allows for more precise soldering, and it also has an energy-saving standby function.
- The Hakko FX-888D is a digital soldering iron with a temperature range of 150-480°C. It has a variety of features, including a temperature memory function, a hot air function, and a stand.
- The Metcal SP-90N is a digital soldering iron with a temperature range of 150-450°C. It is designed for industrial use and has a number of features, including a large display, a variety of tips, and a built-in cleaning station.
Weller WTSF 80 Where To Buy
You can buy the Weller WTSF 80 and spare parts from the following retailers:
- Weller Direct: The Weller website sells the WTSF 80 for $129.99 and a variety of spare parts, including tips, nozzles, and replacement pipes.
- Walmart: Walmart sells the WTSF 80 for $129.99. They also carry a limited selection of spare parts, such as tips and nozzles.
- Amazon: Amazon sells the WTSF 80 for $129.99 and a wider variety of spare parts than Walmart, including tips, nozzles, replacement pipes, and a soldering stand.
- Best Buy: Best Buy sells the WTSF 80 for $129.99. They also carry a limited selection of spare parts, such as tips and nozzles.
- Lowes: Lowes sells the WTSF 80 for $129.99. They also carry a limited selection of spare parts, such as tips and nozzles.
- eBay: eBay is a good place to find used Weller WTSF 80s and spare parts. You can often find them for a fraction of the price of new ones.
I hope this helps!
Weller WTSF 80 Problems and Solutions
some common issues and problems with the Weller WTSF 80 soldering iron, along with solutions from experts:
- The iron won't heat up. This is usually caused by a faulty power cord or heating element. To troubleshoot, check the power cord for any damage and make sure that it is properly plugged into an outlet. If the power cord is okay, then the heating element may be faulty. In this case, you will need to replace the heating element.
- The iron is not getting hot enough. This can be caused by a number of factors, including a dirty tip, a clogged solder well, or a faulty temperature controller. To troubleshoot, clean the tip with a damp sponge and try again. If the tip is still not getting hot enough, then you may need to clear the solder well or replace the temperature controller.
- The iron is overheating. This can be caused by a number of factors, including using the iron on too high of a setting, leaving the iron on for too long, or using a faulty temperature controller. To troubleshoot, turn down the temperature setting and try again. If the iron is still overheating, then you may need to replace the temperature controller.
- The iron is not making good solder joints. This can be caused by a number of factors, including using the wrong type of solder, using too much solder, or not holding the iron in the right spot. To troubleshoot, make sure that you are using the correct type of solder for the application. You should also use a small amount of solder and hold the iron in the joint for a few seconds to allow the solder to melt and flow properly.
- The iron is spitting solder. This can be caused by a number of factors, including using a dirty tip, a clogged solder well, or not using enough flux. To troubleshoot, clean the tip with a damp sponge and try again. If the tip is still spitting solder, then you may need to clear the solder well or add more flux to the joint.
Here are some additional tips for troubleshooting Weller WTSF 80 soldering iron problems:
- Make sure that you are using the correct type of solder for the application. For example, you should use rosin-core solder for most electronics work.
- Use a clean tip. A dirty tip can cause poor solder joints and make it difficult to control the flow of solder.
- Add flux to the joint. Flux helps to clean the metal surfaces and helps the solder to flow more easily.
- Hold the iron in the joint for a few seconds. This will allow the solder to melt and flow properly.
- Don't use too much solder. A little bit of solder goes a long way.
- If you are still having problems, consult the Weller WTSF 80 troubleshooting guide or contact Weller customer support for assistance.
Weller WTSF 80 Manual
Safety Information
- Read and understand all safety warnings and instructions before using the Weller WTSF 80 solder feed system.
- Keep the solder feed system away from children and unauthorized personnel.
- Do not use the solder feed system in an explosive or flammable atmosphere.
- Do not use the solder feed system if it is damaged or malfunctioning.
- Always wear safety glasses when using the solder feed system.
- Be careful not to touch the hot soldering tip.
- Do not leave the solder feed system unattended while it is in use.
- Turn off the solder feed system and unplug it from the power outlet when not in use.
- Allow the solder feed system to cool down completely before storing it.
Before Use
- Make sure that the solder feed system is compatible with the power supply unit that you are using.
- Check the solder feed system for any damage before using it.
- Install the correct solder tip for the application that you are using.
- Adjust the feed rate to the desired setting.
- Turn on the solder feed system and allow it to heat up to the desired temperature.
Troubleshooting
- If the solder feed system is not working, check the power supply unit to make sure that it is turned on and plugged in.
- Check the solder tip to make sure that it is properly installed and that it is not damaged.
- Adjust the feed rate to make sure that it is not too high or too low.
- If you are still having problems, contact Weller customer service for assistance.
Maintenance
- Keep the solder feed system clean by wiping it down with a damp cloth after each use.
- Replace the solder tip regularly, as it will wear out over time.
- Inspect the solder feed system for any damage and repair or replace it as needed.
Warranty
The Weller WTSF 80 solder feed system is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the solder feed system becomes defective during the warranty period, Weller will repair or replace it at no charge.
Contact Information
Weller Tools 1300 N. 11th Street Fond du Lac, WI 54935 Phone: 1-800-558-1408 Email: [email protected] Website: www.weller-tools.com
Additional Information
- The Weller WTSF 80 solder feed system is compatible with solder wire diameters of 0.5 mm, 0.8 mm, and 1.0 mm.
- The feed rate can be adjusted from 1 to 27.5 mm/s.
- The maximum solder wire weight is 1 kg.
- The solder feed system is compatible with the Weller WT 1 soldering iron.
- The solder feed system comes with a one-year warranty.
- For more information, please visit the Weller website or contact Weller customer service.
Comments
Post a Comment